No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change nfs nfsv41_session_forechannel

change nfs nfsv41_session_forechannel


The change nfs nfsv41_session_forechannel command is used to change the NFSv4.1 session fore channel attribute.


change nfs nfsv41_session_forechannel { max_cache_size=? | max_reqs_count=? | max_ops_count=? } *





max_cache_size Maximum fore channel response cache bytes.

The value ranges from 80 to 1,974 bytes.

max_reqs_count Maximum number of slots in a session.

The value ranges from 1 to 256.

max_ops_count Maximum number of compound operations.

The value ranges from 1 to 100.


Developer view

Usage Guidelines



Change the NFSv4.1 session attribute.

developer:/>change nfs nfsv41_session_forechannel max_cache_size=1024
WARNING: You are about to modify the NFSv4.1 session fore channel attribute. This operation may interrupt users' access to the NFS share service or cause access exceptions.
Suggestion: Perform this operation based on the system access requirements.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 760081

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next