No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change pal rtt

change pal rtt

Function

The change pal rtt command is used to enable or disable the request time trace (rtt) function of the PAL module and clear the existing rtt statistics.

Format

change pal rtt operation=? [ controller=? ]

Parameters

Parameter

Description

Value

operation=?

operation type.

The value can be "open", "close", or "clean", where:

  • "open": enables the rtt function of the PAL module.
  • "close": disables the rtt function of the PAL module.
  • "clean": clears the rtt statistics of the PAL module.

controller=?

Controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".

Views

Developer view

Usage Guidelines

If a delivered command does not contain a controller ID, the command will be executed on the local controller.

Example

  • Enable the rtt function.
    developer:/>change pal rtt operation=open 
    Command executed successfully.
  • Disable the rtt function.
    developer:/>change pal rtt operation=close 
    Command executed successfully.
  • Clear the rtt statistics.
    developer:/>change pal rtt operation=clean 
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 622027

Downloads: 55

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next