No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete fs_migration_db

delete fs_migration_db


The delete fs_migration_db command is used to forcibly delete database information about file system migration.


delete fs_migration_db local_fs_id=? db_index=? is_primary=?





local_fs_id Local file system ID of the migration.

To obtain the value, run the "show fs_migration db" command.

db_index Database index of file system migration.

To obtain the value, run the "show fs_migration db" command.

is_primary Whether it is the primary end of file system migration.

To obtain the value, run the "show fs_migration db" command.


Developer view

Usage Guidelines

  • Run this command under the guidance of R&D engineers. This command is only used to delete the configuration of file system migration when file system migration cannot be deleted on the CLI due to migration database errors. Do not use the command in other scenarios.
  • Use this command together with "delete fs_migration_rsstype" and "delete snapsync db" commands, and restart the system.


Delete the database information about file system migration whose file system ID is "1", database index is "1", and the "is_primary" parameter is "true".

developer:/>delete fs_migration_db local_fs_id=1 db_index=1 is_primary=true
DANGER: You are about to forcibly delete file system migration configurations. This operation will cause the corresponding file system migration to be unavailable. This operation enables you to forcibly delete the configuration information about a single item of file system migration if file system migration pairs cannot be deleted properly. 
Suggestion: Before performing this operation, contact R&D engineers and complete all operations under their guidance. In the meantime, ensure that: 
1. No other users are performing configuration operations. 
2. The host I/Os of the file system in migration have been stopped. 
3. The entered parameters are correct.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 757264

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next