Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
logzone show workctrl
Function
The logzone show workctrl command is used to view the working status of controllers.
Format
logzone show workctrl
Parameters
None
Views
Diagnostic view
Usage Guidelines
None
Example
View the working status of controllers.
admin:/diagnose>logzone show workctrl
Local Nid : 0.
ownerNid ctrlNid
0 0
1 1
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
Local Nid |
ID of the local controller. |
ownerNid |
ID of the owner controller. |
ctrlNid |
ID of the working controller. |
Previous
