No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The gf command is used to show all states of the management chip.






serial port mode

Usage Guidelines

Run the gf command to display all the flag bits of the SES.


Run the "gf" command to show all states of the management chip.

g_stSysInfoFlag.ucIsCtrlOrExp                 = ctl board 
g_stSysInfoFlag.ucPANGEARx                    = 0x21 
g_stSysInfoFlag.ucSlotId                      = slotB 
g_stSysInfoFlag.ucChipId                      = SES A 
g_stSysInfoFlag.ucSesIsMaster                 = slave 
g_stSysInfoFlag.ucCpldAbnormal                = FALSE 
g_stSysInfoFlag.ucSlvIsActive                 = 1 
g_stSysInfoFlag.ucSlvToActive                 = 0 
g_stSysInfoFlag.ucPeerInactiveTime            = 0 
g_stSysInfoFlag.ucMstSlvSwitch                = 0 
g_stSysInfoFlag.ucSystemSwitch                = 0 
g_stSysInfoFlag.ucMstSlvSwitchTimes           = 0 
g_stSysInfoFlag.cmd_xchg_request              = 0 
g_stSysInfoFlag.ucShakeandSendFailTime        = 1 (s) 
g_stSysInfoFlag.ucShakeandRecvFailTime        = 0 (s) 
g_stSysInfoFlag.ExpBoardType        = 3 (s) 
g_stSysInfoFlag.BackBoardRate        = 1 (s) 
board onplace = ONPLACE 
RunMode = NORMAL 
heartbeat UART = 1 
simulate ibc fail flag                        = 0 
board power on status                         = 0

System Response


Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 654222

Downloads: 56

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next