No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cliset -d setmaxtimes -v

cliset -d setmaxtimes -v


The cliset -d setmaxtimes -v command is used to set the maximum number of consecutive password attempts.


cliset -d setmaxtimes -v parameter1





parameter1 Maximum number of incorrect password inputs.

The value ranges from 1 to 5.


serial port mode

Usage Guidelines

OceanStor 18500 V5, 18500F V5, 18800 V5 and 18800F V5 storage systems support this command.


Set the maximum number of failed login attempts due to an incorrect password to 3 before an account is locked.

administrator@SMM_6U / $cliset -d setmaxtimes -v 3
Input your password:********
Set max Auth times to 3 successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 757069

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next