No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sys showpoollock

sys showpoollock


The sys showpoollock command is used to view pool locks.


sys showpoollock [ pool id ]





pool id


The ID is displayed in the output of running the "show disk_domain general" command.


Diagnostic view

Usage Guidelines



View the POOL lock of POOL 0.

 admin:/diagnose>sys showpoollock 0 
CLM: show poollock info, input 1 params POOL ID: 0  
 lock id : type subtype pading(0) pading(1) pading(2) pading(3) pading(4) pading(5) key  
              ---- ------- --------- --------- --------- --------- --------- --------- ---  
              0x2 0x0       0x0         0x0         0x0         0x0         0x0         0x0         0x0  
lock proxy(node 1) info: 
 lock info : lock state recnt  
                ---------- -----  
                0            1      
 lock right: hold right wait right award right  
                ---------- ---------- -----------  
                0            0            0            
 lock qCnt : award wait block  
                ----- ---- -----  
                0       0      0      
 grant Q lock request:      Date Time        acq right acq type proxy id sn  
                          ------------------- --------- ---------- -------- --  
                          --                    --          --           --         -- 
 wait Q lock request :      Date Time        acq right acq type proxy id sn  
                          ------------------- --------- ---------- -------- --  
                          --                    --          --           --         -- 
 block Q lock request:      Date Time        acq right acq type proxy id sn  
                          ------------------- --------- ---------- -------- --  
                          --                    --          --           --         --

System Response

The following table describes the parameter meanings.




Lock type.




Count of references.

hold right

Obtained permission.

award right

Permission that has been granted.

grant Q lock request

Queue of successfully granted locks.

wait Q lock request

Queue of locks waiting to be granted.

block Q lock request

Queue of locks blocked to be granted.

Date Time

Request creation time.

acq right

Obtained permission in the lock request.

acq type

Request operation code.

wait right

Permission waiting to be granted.

lock right

Lock permission information.

lock state

State of a lock's running state machine.

lock info

Lock information.


Unique identifier of a lock.


Lock sub-type.

proxy id

Created module ID or ID of the node requesting a lock.


Created SN.

Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 660586

Downloads: 56

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next