No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cln getcloneinfo

cln getcloneinfo


The cln getcloneinfo command is used to view details about a specific clone group in the LDB.


cln getcloneinfo [ clonegroupid ]





clonegroupid Clone group ID.

The value ranges from 0 to n minus one. n indicates the maximum number of primary LUNs of clone.


Diagnostic view

Usage Guidelines

This command must be run on the working controller of the primary LUN.


View details about clone group 0 in the LDB.

admin:/diagnose>cln getcloneinfo 0
*********** CLONE INFORMATION BEGIN **********
Clone ID Clone Name Primary LUN ID Clone System State
0 cln 19 Normal 
Pair ID Secondary LUN ID Data Status Running Status Start Time End Time 
0 18 Synchronizing Synchronizing 2015-11-12 08:31:01 1970-01-01 00:00:00

LUN ID Relationship Clone ID Pair ID
19 Primary 0 -- 
18 Secondary 0 0

************ CLONE INFORMATION END ***********

System Response


Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 743250

Downloads: 59

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next