No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show remote_replication cfg_switch

show remote_replication cfg_switch


The show remote_replication cfg_switch command is used to query the switch status of configuring a synchronization partition for a specified remote replication pair.


show remote_replication cfg_switch pair_id=? partition_type=? option_type=?





pair_id Remote replication pair ID.

To obtain the value, run the "show remote_replication unified" command.

partition_type Type of a configuration synchronization partition.
  • "nfs_share": NFS share partition.
  • "smb_share": SMB share partition.
  • "quota": quota partition.
  • "fs_comm": file system public partition.
optition_type Option type ID.
  • For an NFS share partition, the value is "0".
  • For an SMB share partition, the value is "0" or "1".
  • For a quota partition, the value is "0".
  • For a fs_comm partition, the value is "0" or "1".


Developer view

Usage Guidelines

Run this command under the guidance of R&D engineers.


Query the switch status of configuring a synchronization partition for a specified remote replication pair. The pair ID is "200bc79b99520000", partition_type is "NFS_share", and option_type is "0".

developer:/>show remote_replication cfg_switch pair_id=200bc79b99520000 partition_type=nfs_share option_type=0
  Switch Status : On

System Response

The following table describes the parameter meanings.




Switch status: on and off.

Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 764352

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next