No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete hyper_metro_pair dump

delete hyper_metro_pair dump


The delete hyper_metro_pair dump command is used to delete information about a specific HyperMetro pair. When the LUN or the file system is offline, cannot be recovered, and needs to be forcibly deleted, run this command to delete HyperMetro configurations on the LUN or the file system.


delete hyper_metro_pair dump pair_id=? [ is_refresh_wwn=? ]





pair_id=? ID of the HyperMetro pair.

Run the "show hyper_metro_pair general" command to obtain the value.

is_refresh_wwn Whether to refresh the LUN WWN (valid for SAN HyperMetro pair force delete only).

The value is "yes" or "no", where:

  • "yes": to refresh the WWN.
  • "no": not to refresh the WWN.
The default value is "yes".


Developer view

Usage Guidelines

  • Do not use this command without R&D engineers' guidance. This command can be used to delete the HyperMetro configurations only when the LUN or the file system is offline, cannot be recovered, and needs to be deleted. Do not use this command in other scenarios.
  • Run this command with the command of forcibly deleting this LUN or file system. Run this command to delete HyperMetro configurations on the LUN or the file system first, then delete this LUN or file system forcibly. If the LUN or the file system is configured with a HyperMetro pair, it cannot be deleted. Restart the system after running the commands.


Forcibly delete HyperMetro pair whose ID is "84ad58eb9325c0".

developer:>delete hyper_metro_pair dump pair_id=84ad58eb9325c0
DANGER: You are about to forcibly maintain the HyperMetro configuration. This operation causes the HyperMetro pair, the HyperVault pair and HyperReplication Pair in the local file system of the HyperMetro pair to be unavailable.
Suggestion: Before performing this operation, contract R&D engineers and confirm the following:
1. The system is not being configured by other users.
2. Host I/Os of HyperMetro LUNs or file system have been stopped.
3. The entered parameter values are correct.
4. Restart the system after running the commands.
You need to perform this operation under the guidance of R&D engineers.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 753401

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next