No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change disk_domain lid_switch

change disk_domain lid_switch

Function

The change disk_domain lid_switch command is used to enable or disable the LID function of a disk domain.

Format

change disk_domain lid_switch disk_domain_id=? switch=?

Parameters

Parameter

Description

Value

disk_domain_id=?

ID of the disk domain whose LID function needs to be enabled or disabled.

To obtain the value, run the "show disk_domain general" command on the CLI.

switch=?

Whether the LID function of a disk domain is enabled or disabled.

The value can only be "off", indicating that the LID function of the disk domain is disabled.

Views

Developer view

Usage Guidelines

None

Example

Disable the LID function of a disk domain.

developer:/>change disk_domain lid_switch disk_domain_id=0 switch=off 
Command executed successfully. 
WARNING: You are about to disable the LID function of a disk domain. 
If the LID function is enabled for a disk domain, it cannot be enabled again after this function is disabled. In addition, the data reliability of the disk domain may decrease. 
Suggestion: Before disabling this function, ensure that the disk domain does not require the LID function. 
Do you wish to continue?(y/n)y 
Command executed successfully. 
developer:/>

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 655914

Downloads: 56

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next