No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change private_device proportion

change private_device proportion


The change private_device proportion command is used to enable or disable load balancing between controllers for the I/Os of value-added services between private disk arrays.


change private_device proportion enable=?





enable=? To enable or disable load balancing between controllers.

The value can be yes or no.

  • yes: indicates that load balancing is enabled.
  • no: indicates that load balancing is disabled.


Developer view

Usage Guidelines

You are not advised to enable load balancing between controllers when synchronous replication services are running in the storage system.



developer:/>change private_device proportion enable=yes
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 764257

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next