No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show hypervault_restore general

show hypervault_restore general


The show hypervault_restore general command is used to view restore job information about a HyperVault.


show hypervault_restore general hypervault_id=?





hypervault_id=? ID of the HyperVault object whose restore job information you want to view.

To obtain the value, run the "show hypervault general" command.


Developer view

Usage Guidelines



View restore job information about HyperVault "12345".

developer:/>show hypervault_restore general hypervault_id=12345
Vault ID  :  12345
LocalDs ID: 1
RemoteDs ID: 1
Snap ID:     0
Snap Tx:  1
Job ID:  1211112
Flow Code:   558321234
Db Step:  11
Action Step: 1
Master Ret:  0
Slave Ret:   0
Need Stop: 0

System Response

The following table describes the parameter meanings.



Vault ID

ID of the HyperVault object.

LocalDs ID

ID of the local device resource.

RemoteDs ID

ID of the remote device resource.

Snap ID

ID of the snapshot used for restoration.

Snap Tx

TX of the snapshot restored.

Job ID

ID of the restore job.

Flow Code

OPCODE of the restore job process.

Db Step

DB step of the restore job.

Action Step

Action step of the restore job.

Master Ret

Execution result of the restore job on the primary device.

Slave Ret

Execution result of the restore job on the secondary device.

Need Stop

Flag of restore job suspension.


FS status of restore job clearing on the primary device.

Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 748771

Downloads: 64

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next