No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dcl showdclinfo

dcl showdclinfo


The dcl showdclinfo command is used to view DCL ID information.


dcl showdclinfo dclId






DCL ID generated by a value-added service.

To obtain the value, run "dcl



Diagnostic view

Usage Guidelines

View information about each field corresponding to a DCL ID.


View information about DCL 18.

admin:/diagnose>dcl showdclinfo 18 
Log(0) Information 
Bgr Task Status : 0 
Used Status : 1 
Log Status : 2 
Extent ID : 70369817919490 
Offset : 976 
DCL Information 
DCL Unit Id Bitmap : 262144 
DCL Log Id In Dclinfo : 0 
DCL Current Time : 0 
DCL Unit Status : 1 
DCL Unit Subbitmap Index : 4294967295 
DCL Unit Start Time : 0 
DCL Unit Progress(chunk) : 99275 
DCL Unit Isolation Time : 0

System Response

The following table describes the parameter meanings.



Bgr Task Status

Status of the LUN's background tasks.

Used Status

Whether the LUN is valid.

Log Status

Usage of the LUN.

Extent ID

Partition location.


Partition offset.

DCL Unit Id Bitmap

DCL ID allocated to the LUN.

DCL Log Id In Dclinfo

ID of the LUN to which the DCL ID belongs.

DCL Current Time

Current time.

DCL Unit Status

Status of the DCL ID.

DCL Unit Subbitmap Index

Sub-bitmap array subscript.

DCL Unit Start Time

Start time.

DCL Unit Progress(chunk)

Current progress.

DCL Unit Isolation Time

Isolation time.

Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 662512

Downloads: 56

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next