No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The sshtoipenclosure command is used to remotely log in to a node in a smart enclosure. To use this command, you must enter the password of the current user.


sshtoipenclosure EnclosureId





EnclosureId ID of a node in a smart enclosure.



Minisystem mode

Usage Guidelines

OceanStor 18500 V5 Kunpeng, 18500F V5 Kunpeng, 18800 V5 Kunpeng and 18800F V5 Kunpeng storage systems support this command.


Remotely log in to node "A" of enclosure "DAE0D0".

Storage: minisystem> sshtoipenclosure DAE0D0.A
Enclosure ip:
Ssh to enclosure(EnclosureID=DAE0D0.A) with admin......
Warning: Permanently added '' (ECDSA) to the list of known hosts.
Authorized users only. All activities may be monitored and reported.
admin@'s password: 
WARNING: You have accessed the system.
You are required to have a personal authorisation from the system administrator before you use this computer. Unauthorised access to or misuse of this system is prohibited.
Storage: developer>

System Response

The following table describes the parameter meanings.




Password to be entered. After correctly entering the password, the user can log in to the system.

Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 756755

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next