Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show nfs nfsv3_readdirplus_support
Function
The show nfs nfsv3_readdirplus_support command is used to show whether the readdirplus is supported by NFSv3 protocol.
Format
show nfs nfsv3_readdirplus_support [ controller=? ]
Parameters
Parameter |
Description |
Value |
|---|---|---|
controller=? |
Indicates the controller ID. |
The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C". |
Views
Developer view
Usage Guidelines
None
Example
To show whether the readdirplus is supported by NFSv3 protocol.
developer:/>show nfs nfsv3_readdirplus_support controller=0A
Status : Disabled
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
Status |
The support status of NFSv3 readdirplus. |
Previous
