No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change consistency_group startup

change consistency_group startup


The change consistency_group startup command is used to forcibly change the local end of a remote replication consistency group to the primary end.


change consistency_group startup consistency_group_id=?






ID of a consistency group.

To obtain the value, run "show consistency_group general".


Developer view

Usage Guidelines

  • Use this command when the primary/secondary switchover of a remote replication consistency group fails due to an exception.
  • Use this command under the guidance of maintenance engineers.


Forcibly change the local end of remote replication consistency group "9747215445131264" to the primary end.

developer:/>change consistency_group startup consistency_group_id=9747215445131264 
DANGER: You are about to upgrade the local end to be the primary end of the remote replication consistency group. This operation forcibly upgrades the local end to be the primary end of the remote replication consistency group. The remote replication consistency group may have two primary ends. As a result, the remote replication consistency group becomes invalid. 
Suggestion: Before performing this operation, ensure that the selected remote replication consistency group is correct and both ends of the remote replication consistency group are secondary ends. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 621575

Downloads: 55

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next