No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show fs_snap_control status

show fs_snap_control status


The show fs_snap_control status command is used to view the background status of a specific file system snapshot.


show fs_snap_control status file_system_id=? command_type=? controller=?





command_type=? Type of the task that you want to query.

The value can be "schedule", "back_ground_status", or "auto_delete_switch", where:

  • "schedule": scheduled policy.
  • "back_ground_status": background task status.
  • "auto_delete_switch": automatic deletion switch.
file_system_id=? ID of the file system to which the snapshot to be queried belongs.

To obtain the value, run the "show file_system general" command.

controller=? ID of a controller.

To obtain the value, run "show controller general".


Developer view

Usage Guidelines

  • Before performing this operation, check whether the background task status to be queried is correct.
  • Before performing this operation, check whether the file system ID to be queried is correct.


Status of a specific file system snapshot schedule.

developer:/>show fs_snap_control status file_system_id=0 command_type=schedule controller=0A
Type : 1
Bitmap : 0
Minutes : 0
Status : --
Background Running Number : --
Auto Delete Task ID : --
Auto Delete Running : --
FS Status : --
Auto Delete Switch : --

System Response

The following table describes the parameter meanings.




Schedule type.




Time interval.

Auto Delete Running

Automatic deletion is running.

FS Status

Status of the file system.

Background Running Number

Number of background running tasks.

Auto Delete Task ID

ID of automatic deletion tasks.


Status of the schedule.

Auto Delete Switch

Switch of automatic deletion.

Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 744640

Downloads: 59

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next