No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
uboot_cp1

uboot_cp1

Function

The uboot_cp1 command is used to copy U-Boot to flash.

Format

uboot_cp1

Parameters

None

Modes

serial port mode

Usage Guidelines

None

Example

Copy U-Boot to flash.

Hi1710_UBOOT> uboot_cp1                                                                                                             
During the upgrade, ensure that the PCB is powered on and is not in the reset process, or the upgrade will fail, or even worse, the 
PCB cannot work normally.                                                                                                           
erase flash from :40100000 to :4017ffff,please wait a while                                                                         
- Warning: 4 protected sectors will not be erased!                                                                                  
 done                                                                                                                               
Erased 4 sectors                                                                                                                    
Copy u-boot to flash,please wait a while                                                                                            
 erase flash from :401e0000 to :401fffff,please wait a while                                                                        
- Warning: 1 protected sectors will not be erased!                                                                                  
 done                                                                                                                               
Erased 1 sectors                                                                                                                    
Protect Flash Sectors 0-15 in Bank # 1                                                                                              
                                                                                                                                    
Success to load u-boot1.please update uboot0 and uboot1 in a uboot update process.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 758429

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next