No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The initpasswd command is used to initialize the password of the super administrator.






serial port mode

Usage Guidelines

  • This command can be used through serial ports only.
  • You can run this command on any controller. After running this command, you are prompted to enter your user name and password, and the password will be automatically synchronized to other controllers.


To initialize the password of the super administrator, run the following command.

Storage: _super_admin> initpasswd
please input username:admin
init admin passwd,wait a moment please...
*****please enter new password for admin :*****
*****please re-enter new password for admin :*****
Init admin passwd succeeded

System Response


Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 765715

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next