Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
lmr showhealstate
Function
The lmr showhealstate command is used to check the heal state of a hyper mirror.
Format
lmr showhealstate
Parameters
None
Views
Diagnostic view
Usage Guidelines
None
Example
To check the heal state of a hyper mirror, run the following command.
admin:/diagnose>lmr showhealstate
The heal module is enable.
System Response
None
Previous
