No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show system_disk upgrade_status

show system_disk upgrade_status

Function

The show system_disk upgrade_status command is used to display the upgrade status of system disks.

Format

show system_disk upgrade_status [ controller=? ]

Parameters

Parameter

Description

Value

controller ID of a controller or smart enclosure.

The value of a controller is in the format of "XA", "XB", "XC", or "XD", where the "X" is an integer ranging from 0 to 3. To obtain the value, run "show controller general".

The value of a smart enclosure is in the format of "DAEXXX.A" or "DAEXXX.B", where the "X" is a hexadecimal number ranging from 0 to F. To obtain the value, run "show expansion_module".

Views

Developer view

Usage Guidelines

  • Run the "show system_disk upgrade_status" command to query the upgrade information of all system disks.
  • Run the "show system_disk upgrade_status controller=?" command to query the upgrade information of system disks on the specified node.

Example

Query the upgrade information of all system disks.

developer:/>show system_disk upgrade_status
Controller  Slot     Upgrade Status
------------ ------------ ----------------
0A      23      Success
0B      24      Executing

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Controller

Controller ID.

Slot

Slot ID.

Upgrade Status

Upgrade status.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 760039

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next