No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mrr showcheckinfo

mrr showcheckinfo


The mrr showcheckinfo command is used to view the status of metadata repair.


mrr showcheckinfo




Diagnostic view

Usage Guidelines



View the metadata repair status.

admin:/diagnose>mrr showcheckinfo
Operate Type                  : data extent
Disk Domain ID                : 0
Result                        : ---
Fail Reason                   : ---
Begin Time                    : ---
End Time                      : ---
Repaired Queue                : 0
Need Repair Queue             : 0
Repaired Extent               : 0
Need Repair Extent            : 0

System Response

The following table describes the parameter meanings.



Disk Domain ID

Indicates the disk domain ID.


Indicates the result of the operation.

Fail Reason

Indicates the fail reason of the operation.

Begin Time

Indicates the begin time of the operation.

End Time

Indicates the end time of the operation.

Repaired Queue

Indicates the repaired count of queue.

Need Repair Queue

Indicates the need repair count of queue.

Repaired Extent

Indicates the repaired count of extent.

Need Repair Extent

Indicates the need repair count of extent.

Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 763450

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next