No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preface

Preface

Purpose

Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.

The commands provided in this document are used for debugging and maintenance of storage systems, and ask for a higher execution permission than the commands run in the user view. It is recommended that they should be executed by experienced engineers with caution or under the guidance of Huawei engineers.
An improper execution of any command may interrupt ongoing services and cause storage system failures. Users' decisions to use those commands by their own are entirely at their own risk.
This document is applicable to the following product models.

Product Series

Product Model

Version

OceanStor 18000 V5 series

OceanStor 18500 V5 ,18800 V5

V500R007C60 Kunpeng

OceanStor 18500 V5 ,18800 V5

V500R007C60

OceanStor 18000F V5 series

OceanStor 18500F V5 ,18800F V5

V500R007C60 Kunpeng

OceanStor 18500F V5 ,18800F V5

V500R007C60

Intended Audience

This document is intended for:

  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury.

Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury.

Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Supplements the important information in the main text.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 02 (2019-12-30)

This is the second official release.

Issue 01 (2019-10-30)

This is the first official release.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 698966

Downloads: 58

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next