Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
devlun showstate
Function
The devlun showstate command is used to view LUN status.
Format
devlun showstate lunid
Parameters
Parameter |
Description |
Value |
|---|---|---|
lunid |
Valid LUN ID. |
The LUN ID can be obtained by running the show lun general command in super administrator mode. |
Views
Diagnostic view
Usage Guidelines
This command can be used to view LUN information.
Example
View the status of LUN 0.
admin:/diagnose>devlun showstate 0
LUN is start!lunId(0).
Lunid : 0
DispatchReadIOCount : 1
DispatchWriteIOCount : 1
lun workControllerId : 1
lun count stat : NONE
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
lunId |
LUN ID. |
DispatchWriteIOCount |
Count of delivered write I/Os. |
lun workControllerId |
ID of a LUN's working controller. |
DispatchReadIOCount |
Count of delivered read I/Os. |
lun count stat |
LUN count status. |
Previous
