No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show slotcfg

show slotcfg

Function

The show slotcfg command is used to query configuration information about all interface slots in a specified enclosure.

Format

show slotcfg enclosure_id=?

Parameters

Parameter

Description

Value

enclosure_id=? Enclosure ID.

To obtain the value, run "show enclosure" without parameters.

Views

Developer view

Usage Guidelines

OceanStor 18500 V5 Kunpeng, 18500F V5 Kunpeng, 18800 V5 Kunpeng and 18800F V5 Kunpeng storage systems support this command.

Example

Query configuration information about all interface slots in enclosure CTE0.

developer:/>show slotcfg enclosure_id=CTE0                                                    
  ID            Work Mode  Service Mode  Speed  
  ------------  ---------  ------------  -----  
  CTE0.IOM.H0   Ethernet   Front-End     100G   
  CTE0.IOM.H1   --         --            --     
  CTE0.IOM.H2   --         --            --     
  CTE0.IOM.H3   --         --            --     
  CTE0.IOM.H4   --         --            --     
  CTE0.IOM.H5   --         --            --     
  CTE0.IOM.H6   --         --            --     
  CTE0.IOM.H7   --         --            --     
  CTE0.IOM.H8   --         --            --     
  CTE0.IOM.H9   --         --            --     
  CTE0.IOM.H10  --         --            --     
  CTE0.IOM.H11  --         --            --     
  CTE0.IOM.H12  --         --            --     
  CTE0.IOM.H13  --         --            --     
  CTE0.IOM.L0   --         --            --     
  CTE0.IOM.L1   --         --            --     
  CTE0.IOM.L2   --         --            --     
  CTE0.IOM.L3   --         --            --     
  CTE0.IOM.L4   --         --            --     
  CTE0.IOM.L5   --         --            --     
  CTE0.IOM.L6   --         --            --     
  CTE0.IOM.L7   --         --            --     
  CTE0.IOM.L8   --         --            --     
  CTE0.IOM.L9   --         --            --     
  CTE0.IOM.L10  --         --            --     
  CTE0.IOM.L11  --         --            --     
  CTE0.IOM.L12  --         --            --     
  CTE0.IOM.L13  --         --            --     
developer:/>

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Slot ID.

Work Mode

Working mode.

Service Mode

Application scenario.

Speed

Speed.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 753268

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next