Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rephv vault show
Function
The rephv vault show command is used to query information about HyperVault tasks on the current controller.
Format
rephv vault show [ pairId ]
Parameters
Parameter |
Description |
Value |
|---|---|---|
pairId |
ID of the HyperVault object. |
To obtain the value, run the "rephv vault show" command without parameters. |
Views
Diagnostic view
Usage Guidelines
The command is run on the local controller by default.
Example
Query information about all HyperVault tasks on the current controller.
admin:/diagnose>rephv vault show
Vault info:
vaultId localFsId localIndex pairState linkMode svcId needSmooth
20023232317929952 3 1 3 1 1 1
20023232317929953 4 2 3 1 2 1
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
vaultId |
Indicates the ID of the hypervault object. |
localFsId |
Indicates the ID of local file system. |
localIndex |
Indicates the ID of local DD table. |
pairState |
The running status of hypervault. |
linkMode |
Error rectifying policy. |
svcId |
Service ID. |
needSmooth |
Smooth flag. |
Previous
