No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show disk_bom whitelist

show disk_bom whitelist


The show disk_bom whitelist command is used to show disk items in a BOM whitelist.


show disk_bom whitelist [ detail=? ]





detail Detailed information.

The value is "yes" or "no", where:

  • "yes": shows a detailed BOM list.
  • "no": shows a brief BOM list.


Developer view

Usage Guidelines



  • Show a brief disk BOM list in the BOM whitelist.

    developer:/>show disk_bom whitelist
    BOM Code : 02350SMW,02350SNC,02350SND,02350SNJ,02350SNK,02350SNM,02350SNN,02350TLR
  • Show a detailed disk BOM list in the BOM whitelist.

    developer:/>show disk_bom whitelist detail=yes
    Init BOM Code : 02350SMW,02350SNC,02350SND,02350SNJ,02350SNK,02350SNM,02350SNN,02350TLR
    Add BOM Code : 02350SMW,02350SNC,02350SNE
    Del BOM Code : 02350SNJ,02350SNK

System Response

The following table describes the parameter meanings.



Init BOM Code

Initial list that contains the disk items pre-configured from the factory.

Add BOM Code

Added list that contains the disk items added by users through CLI.

Del BOM Code

Deleted list that contains the disk items deleted by users through CLI.

BOM Code

Total list that contains the disk items pre-configured from the factory and configured by users.

Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 749567

Downloads: 64

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next