No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cliset -d setbackboardmodel

cliset -d setbackboardmodel

Function

The cliset -d setbackboardmodel command is used to set the backplane type.

Format

cliset -d setbackboardmodel <value>

Parameters

Parameter

Description

Value

value Backplane type.

0x55: 28 PCIe channels.

0xaa: 12 SAS channels + 16 PCIe channels.

0x5a: 8 SAS channels + 20 PCIe channels.

Modes

serial port mode

Usage Guidelines

OceanStor 18500 V5 Kunpeng, 18500F V5 Kunpeng, 18800 V5 Kunpeng and 18800F V5 Kunpeng storage systems support this command.

Example

Set the backplane type to "0x55". The command output varies depending on a specific product.

iBMC:/->cliset -d setbackboardmodel 0x55
Write backboard model 0x55 succeed

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 758368

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next