No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Advanced O&M Command Reference
OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
appfs_up

appfs_up

Function

The appfs_up command is used to upgrade the app file system.

Format

appfs_up <filename>

Parameters

None

Modes

serial port mode

Usage Guidelines

None

Example

Upgrade the app file system.

Hi1710_UBOOT> appfs_up appfs.cramfs
tftp server IP:192.168.0.2
BMC board  IP:192.168.0.1
file name:appfs.cramfs
TFTP from server 192.168.0.2; our IP address is 192.168.0.1
Filename 'appfs.cramfs'.
Load address: 0x8b000000
Loading: *#################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  #################################################################
  ###############################################################
done
Bytes transferred = 7589888 (73d000 hex)
During the upgrade, ensure that the PCB is powered on and is not in the reset process, or the upgrade will fail, or even worse, the PCB cannot work normally.
 
###erase flash from :41c00000 to :42bfffff,please wait a while
 
................................................................................................................................ done
Erased 128 sectors
Copy app file system to flash,please wait a while
 9....8....7....6....5....4....3....2....1....
 
###erase flash from :44c00000 to :45bfffff,please wait a while
 
................................................................................................................................ done
Erased 128 sectors
Copy app file system to flash,please wait a while
 9....8....7....6....5....4....3....2....1....
 
Success to load app file system.

System Response

None

Translation
Download
Updated: 2020-03-19

Document ID: EDOC1000181602

Views: 846944

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next