No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sddebug show conf

sddebug show conf

Function

The sddebug show conf command is used to query the disk access restriction on the current device.

Format

sddebug show conf usermode

Parameters

Parameter

Description

Value

usermode
  • When this parameter is mandatory, the current command can be used only in the user mode.
  • When this parameter is optional, the current command can be used in both the user mode and kernel mode.

The value is "-app_data", indicating that the command is executed in the user mode.

Views

Diagnostic view

Usage Guidelines

  • Run the "sddebug show conf -app_data" command to query the disk access restriction on the current device in user mode.
  • This command can be executed only in the user mode.
  • OceanStor 18500 V5 Kunpeng, 18500F V5 Kunpeng, 18800 V5 Kunpeng and 18800F V5 Kunpeng storage systems support this command.

Example

Query the disk access restriction on the current device.

admin:/diagnose> sddebug show conf -app_data
AllowedDiskSectorSize   : 520, 4160, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
AllowedDiskProductLevel : 200 
AllowedDiskType : 1

System Response

The following table describes the parameter meanings.

Parameter

Meaning

AllowedDiskSectorSize

Disk sector size. A disk whose sector size is one of the display values is allowed to access the system.

AllowedDiskProductLevel

Disk level. A disk whose disk level is greater than or equal to this threshold is allowed to access the system.

AllowedDiskType

Type of the disk that is allowed to access the system.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 744194

Downloads: 59

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next