No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete hypervault_db general

delete hypervault_db general

Function

The delete hypervault_db general command is used to forcibly delete information about a HyperVault pair from the database.

Format

delete hypervault_db general hypervault_id=? local_dbkey=? file_system_id=?

Parameters

Parameter

Description

Value

hypervault_id=?

ID of the HyperVault object.

To obtain the value, run the "show hypervault general" command without parameters.

local_dbkey=?

KEY of the HyperVault object stored in the database.

Export the CCDB and check the incorrect local_dbkey.

file_system_id=?

File system ID.

To obtain the value, run the "show file_system general" command.

Views

Developer view

Usage Guidelines

  • Do not use this command without R&D engineers' guidance. This command can only be used to delete the HyperVault configuration when the HyperVault database encounters errors and you cannot delete HyperVault pairs on the CLI. Do not use this command in other scenarios.
  • This command must be used with the "delete hypervault service_db", "delete hypervault dcl", and "delete hypervault rss_type" commands. Restart the system after running the commands.

Example

Deleting information about the HyperVault pair whose ID is "9747215445131264" from the database.

developer:/>delete hypervault_db general hypervault_id=9747215445131264 local_dbkey=0 file_system_id=0 
DANGER: You are about to forcibly maintain HyperVault.This operation will cause the corresponding value-added pair to be unavailable. 
This operation enables you to forcibly delete the configuration information about a single item of HyperVault if HyperVault objects cannot be deleted properly. 
Suggestion: Before performing this operation, contract R&D engineers, perform all procedures under their guidance, and confirm the operation. 
1. The system is not configured by other users. 
2. The parameter values that are entered are correct. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 627727

Downloads: 55

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next