C:\Huawei\start_auto.bat

Auto-start of the Windows server after power-on.

Checks whether the ofcservice of the OfficeScan works properly. If no, starts the ofcservice.

The ofcservice is enabled.

C:\ProgramData\Microsoft\Windows\StartMenu\Programs\StartUp\start_auto.vbs

Auto-start of the Windows server after power-on.

Invokes C:\Huawei\start_auto.bat after power-on.

The ofcservice is enabled.

D:\Huawei\Tool\export_log\export_device_log_manually.bat

Unable to use log collection tools.

Collects the logs of the controller specified by arrays.

The logs of the controller specified by arrays are exported.

D:\Huawei\TLVServer\bin\upgrade_client.exe

Upgrade of the management software.

Upgrades the management software.

A component that is internally invoked in the management software upgrade process cannot be directly invoked.

C:\Huawei\user_manager\iptool.exe

IP address of the SVP management port obtained by the cloudservice on the Windows server.

Queries the IP address of the current SVP management port.

The IPv4 and IPv6 address of the SVP are displayed.

C:\Huawei\run.bat

Scheduled synchronization of the NTP time source by the Windows server.

Synchronizes the NTP time source periodically by the Windows server.

The w32time is enabled or disabled, and the NTP time source is synchronized periodically.

D:\Huawei\TLVServer\bin\tlv_server.exe

Modifying the SVP time zone using the CLI command, and the system time zone on the Windows server using the components invoked by the background.

Accepts messages of the Linux VM, and invokes and modifies the system time zone.

The internal server should not be invoked directly.

D:\Huawei\fdsa\bin\fdsa.exe

Enabling the FDSA monitoring function.

Monitors the key processes and the system resources.

This command cannot be run manually.

D:\Huawei\fdsa\bin\fdsa_daemon.exe

Enabling the FDSA monitoring function.

Monitors the FDSA.

This command cannot be run manually.

D:\Huawei\fdsa\install.bat

Installing the FDSA.

Installs the FDSA.

The FDSA is reinstalled (This command is in protection, it can only be run when the install is uploaded.

D:\Huawei\fdsa\start_daemon.bat

Power-on of the Windows server.

Enables the fdsadaemon.

The fdsadaemon is enabled.

D:\Huawei\fdsa\start_fdsa.bat

Enabling the FDSA monitoring function.

Enables the FDSA.

The FDSA is enabled.

D:\Huawei\fdsa\stop_daemon.bat

Uninstalling the FSDA.

Disables the FSDA and the fdsadaemon.

The FSDA and the fdsadaemon are disabled.

D:\Huawei\fdsa\uninstall.bat

Uninstalling the FSDA.

Uninstalls the FDSA.

The FDSA is uninstalled (This command is in protection, it can only be run when the uninstall is uploaded.

D:\Huawei\tool\WindowsInfoTool.bat

Collects log files manually on the Windows server. The log files are used to locate and analyze faults.

Collects log files on the Windows server.

Collects log files, and stores the log files to the root directory of drive D in a compression mode.