No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cliget -d fancellinformation

cliget -d fancellinformation

Function

The cliget -d fancellinformation command is used to view information about fans.

Format

cliget -d fancellinformation

Parameters

None

Modes

serial port mode

Usage Guidelines

OceanStor 18500 V5 Kunpeng, 18500F V5 Kunpeng, 18800 V5 Kunpeng and 18800F V5 Kunpeng storage systems support this command.

Example

View the in-position status, speed level, rotational speed, health status, running module, and working status of fans. The command output varies depending on a specific product.

iBMC:/->cliget -d fancellinformation
The FAN mode: Auto
The FAN0' is not present.
the FAN1-0's sleep: run
the FAN1-0's level: 20
the FAN1-0's speed: 16440
the FAN1-0's speed State: Health
the FAN1-1's sleep: run
the FAN1-1's level: 20
the FAN1-1's speed: 16080
the FAN1-1's speed State: Health
the FAN2-0's sleep: run
the FAN2-0's level: 20
the FAN2-0's speed: 16440
the FAN2-0's speed State: Health
the FAN2-1's sleep: run
the FAN2-1's level: 20
the FAN2-1's speed: 16200
the FAN2-1's speed State: Health
the FAN3-0's sleep: run
the FAN3-0's level: 20
the FAN3-0's speed: 16440
the FAN3-0's speed State: Health
the FAN3-1's sleep: run
the FAN3-1's level: 20
the FAN3-1's speed: 16440
the FAN3-1's speed State: Health
the FAN4-0's sleep: run
the FAN4-0's level: 20
the FAN4-0's speed: 16320
the FAN4-0's speed State: Health
the FAN4-1's sleep: run
the FAN4-1's level: 20
the FAN4-1's speed: 16200
the FAN4-1's speed State: Health
the FAN5-0's sleep: run
the FAN5-0's level: 20
the FAN5-0's speed: 16440
the FAN5-0's speed State: Health
the FAN5-1's sleep: run
the FAN5-1's level: 20
the FAN5-1's speed: 16320
the FAN5-1's speed State: Health
the FAN6-0's sleep: run
the FAN6-0's level: 20
the FAN6-0's speed: 16440
the FAN6-0's speed State: Health
the FAN6-1's sleep: run
the FAN6-1's level: 20
the FAN6-1's speed: 16320
the FAN6-1's speed State: Health
the FAN7-0's sleep: run
the FAN7-0's level: 20
the FAN7-0's speed: 15810
the FAN7-0's speed State: Health
the FAN7-1's sleep: run
the FAN7-1's level: 20
the FAN7-1's speed: 15660
the FAN7-1's speed State: Health
the FAN8-0's sleep: run
the FAN8-0's level: 20
the FAN8-0's speed: 15960
the FAN8-0's speed State: Health
the FAN8-1's sleep: run
the FAN8-1's level: 20
the FAN8-1's speed: 15780
the FAN8-1's speed State: Health
the FAN9-0's sleep: run
the FAN9-0's level: 20
the FAN9-0's speed: 15870
the FAN9-0's speed State: Health
the FAN9-1's sleep: run
the FAN9-1's level: 20
the FAN9-1's speed: 15660
the FAN9-1's speed State: Health
the FAN10-0's sleep: run
the FAN10-0's level: 20
the FAN10-0's speed: 15870
the FAN10-0's speed State: Health
the FAN10-1's sleep: run
the FAN10-1's level: 20
the FAN10-1's speed: 15660
the FAN10-1's speed State: Health

System Response

The following table describes the parameter meanings.

Parameter

Meaning

the FAN mode

Working mode of the fan (manual or automatic).

the FAN0~6's sleep

Sleep status of the fans whose IDs range from 0 to 6.

the FAN0~6's level

Speed level of the fans whose IDs range from 0 to 6 .

the FAN0~6's speed

Rotational speed of the fans whose IDs range from 0 to 6.

the FAN0~6's speed State

Rotational speed status of the fans whose IDs range from 0 to 6.

the FAN7~11's sleep

Working status of the fan control board (sleep or running).

the FAN7~11's level

Speed level of the fans whose IDs range from 7 to 11 on the fan control board.

the FAN7~11's speed

Rotational speed of the fans whose IDs range from 7 to 11 on the fan control board.

the FAN7~11's speed State

Rotational speed health status of the fans whose IDs range from 7 to 11 on the fan control board.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 748733

Downloads: 64

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next