No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
netqos countfunc

netqos countfunc

Function

The netqos countfunc command is used to query the execution status of each function in the netqos module.

Format

netqos countfunc

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

Query the execution status of each function in the netqos module.

 
admin:/diagnose>netqos countfunc -devm
GetEthNameWithID                : 0/8
Init                            : 0/1
SetHostchainForward             : 0/0
SetQosCfg                       : 0/8
GetQosCfg                       : 0/0
GetFlowPriority                 : 0/46
SetIpFrameTcPercent             : 0/0
AddMac                          : 0/0
DelMac                          : 0/0
QueryMac                        : 0/0
 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

GetEthNameWithID

Number of times that the network port name fails to be obtained/Number of times that the network port name is obtained.

Init

Number of module initialization failures/Number of module initialization times.

SetHostchainForward

Number of times that Layer 2 forwarding fails to be set/Number of times that Layer 2 forwarding is set.

SetQosCfg

Number of times that QoS fails to be configured/Number of times that QoS is configured.

GetQosCfg

Number of times that the QoS configuration fails to be obtained/Number of times that the QoS configuration is obtained.

GetFlowPriority

Number of times that the traffic priority fails to be obtained/Number of times that the traffic priority is obtained.

SetIpFrameTcPercent

Number of times that the disk enclosure level fails to be set/Number of times that the disk enclosure level is set.

AddMac

Number of times that MAC addresses fail to be added to disk enclosure ports/Number of times that MAC addresses are added to disk enclosure ports.

DelMac

Number of times that MAC addresses fail to be deleted from disk enclosure ports/Number of times that MAC addresses are deleted from disk enclosure ports.

QueryMac

Number of times that a MAC address fails to be set for the disk enclosure/Number of times that a MAC address is set for the disk enclosure.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 763751

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next