No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
snap showldbinfo

snap showldbinfo


The snap showldbinfo command is used to view details about a specific snapshot in the LDB.


snap showldbinfo snapshotID=?





snapshotID=? Snapshot ID.

The value ranges from 0 to n minus one. n indicates the maximum number of LUNs.


Diagnostic view

Usage Guidelines



View details about a specific snapshot in the LDB.

admin:/diagnose>snap showldbinfo 4
DB Record Status : Used
Snap LUN ID : 4
Source LUN ID : 0
Snap Type : Public
Snap Pair Status : Active
Snap Right Status : Write
Active Time Point : 1
Active Time : 1325489
Restore DCL ID : Invalid
Restore Speed : Invalid
Restore Time Point : Invalid
Restore Start Time : Invalid
Restore Over Time : Invalid

System Response

The following table describes the parameter meanings.



DB Record Status

GDB record status of snapshots.


ID of the snapshot LUN.

Source LUN ID

ID of the source LUN.

Snap Type

Snapshot type.

Snap Pair Status

Running status of the snapshot.

Snap Right Status

Read/write permission for the snapshot.

Active Time Point

Point in time when the snapshot is activated.

Active Time

Time when the snapshot is activated.

Restore DCL ID

ID of the restore differential bitmap.

Restore Speed

Restore speed.

Restore Time Point

Restore time point.

Restore Start Time

Time when the restore starts.

Restore Over Time

Time when the restore ends.

Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 757139

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next