No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
drvunf showdetail

drvunf showdetail


The drvunf showdetail command is used to query the firmware and resources on a specific Fibre Channel port.


drvunf showdetail portid






Port ID.

To obtain the value, run the "drvunf showportinfo" command. For example, 0x110000.


Diagnostic view

Usage Guidelines



Query the firmware and resources on port 0, slot 0 of the Fibre Channel interface module.

admin:/diagnose>drvunf showdetail 0x110000 

* Firmware Details: 
** status: 
Firmware state(1h). 
SFP Status(1h). 
Firmware version detail(Mst:1.01T31,Hw:ioc_v1r1,MstSub:Mst: Dec 29 2014 14:07:,FcSub:Dec 29 2014 
Chip temperature(60h). 
*** Host resource Details: 
***Card type 0x0 Hw buffer available 0x1,HwCI 0x3,HwPI 0x3, context len 0x0: 
*** Send FcpCmd Request queue: 
Request queue id 0,max queue len 2048:Pi/Ci **<<0x 16/0x 15>>** len( 1)----Logic statepage 
Pi/Ci**<<0x 16/0x 16>>**len( 0). 
*** Receive FcpCmd Request queue: 
Response queue id 0,max queue len 2048:Pi/Ci **<<0x 1b/0x 1b>>** len( 0)----Logic statepage 
Pi/Ci**<<0x 1b/0x 1a>>**len( 1). 
*** Data Response queue: 
Request queue id 1,max queue len 2048:Pi/Ci **<<0x 1/0x 0>>** len( 1)----Logic statepage 
Pi/Ci**<<0x 1/0x 1>>**len( 0). 
*** Data Response done queue: 
Response queue id 1,max queue len 2048:Pi/Ci **<<0x 1/0x 1>>** len( 0)----Logic statepage 
Pi/Ci**<<0x 1/0x 0>>**len( 1). 
*** Els Request queue: 
Request queue id 2,max queue len 2048:Pi/Ci **<<0x b/0x a>>** len( 1)----Logic statepage 
Pi/Ci**<<0x b/0x b>>**len( 0). 
*** Els Response queue: 
Response queue id 2,max queue len 2048:Pi/Ci **<<0x 2d/0x 2d>>** len( 0)----Logic statepage 
Pi/Ci**<<0x 2d/0x 2c>>**len( 1). 
*** Fifo In: 
Fifo 0,Len 2560:Pi/Ci **<<0x 7/0x 7>>** queue len 0. 
*** Fifo Out: 
Fifo 0,Len 2560:Pi/Ci **<<0x 3/0x 3>>** queue len 0.

System Response

The following table describes the parameter meanings.



Firmware Details

Firmware information.

Host Res Details

Detail information of host resource.

Send FcpCmd Request queue

Request sending queue of Fcp commands.

Receive FcpCmd Request queue

Request receiving queue of Fcp commands.

Data Response queue

Data response queue.

Data Response done queue

Completed data response queue.

Els Request queue

Extended link server request queue.

Els Response queue

Extended link server request response queue.

Fifo In

Chip upstream buffer queue.

Fifo Out

Chip downstream buffer queue.

Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 650692

Downloads: 56

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next