No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
xnet calcrsp

xnet calcrsp

Function

The xnet calcrsp command is used to view the number of the target controller's requests that get no response.

Format

xnet calcrsp -c controller -f log flag

Parameters

Parameter

Description

Value

controller

Controller ID.

The value ranges from 0 to the number of controllers minus one.

log flag

Whether logs are printed.

The value can be 0 or 1.

  • 0: Logs are not printed.
  • 1: Logs are printed.

Views

Diagnostic view

Usage Guidelines

If some service messages get no response, you can run this command to view the number of messages that get no response in XNET and then use -f to print message properties into logs.

Example

View the number of controller 0's requests that get no response.

admin:/diagnose>xnet calcrsp -c 0 -f 1 
Current Response Struct Number:0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Current Response Struct Number

Number of local controller's messages which the remote controller does not respond to.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 631366

Downloads: 56

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next