No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ld show xnet

ld show xnet

Function

The ld show xnet command is used to view the count of XNET messages of a logical disk.

Format

ld show xnet

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

View the count of XNET messages of a logical disk.

admin:/diagnose>ld show xnet
send to other 163
send to other ack 163
send to other fail 0
back from other 163
******************************
recv from other 103
resp to other 103

System Response

The following table describes the parameter meanings.

Parameter

Meaning

send to other

Count of XNET messages sent by the logical disk.

send to other ack

Count of XNET messages that are sent by the logical disk and have been confirmed.

send to other fail

Count of XNET messages that fail to be sent by the logical disk.

back from other

Count of XNET messages that are sent by the logical disk and get responses.

recv from other

Count of XNET messages received by the logical disk.

resp to other

Count of XNET messages received and responded to by the logical disk.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 758764

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next