No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
clear sid_mapping_cache

clear sid_mapping_cache

Function

The clear sid_mapping_cache command is used to clear SID mapping cache.

Format

clear sid_mapping_cache controller=? [ from_sid=? | from_id=? ] [ id_type=? ]

Parameters

Parameter

Description

Value

controller Controller ID.

The value format can be "XA", "XB", "XC" and "XD", where the value of X can be an integer ranging from 0 to 3. To obtain the value, run the "show controller general" command.

from_sid Pre-mapping SID.

The value is a string containing 3 to 256 characters and must meet definitions in [MS-DTYP].

from_id Pre-mapping ID.

The value ranges from 0 to 4294967295.

id_type Type of a user or group.

The value can be "0", "1" and "7". Where:

  • "0": Local resource user group.
  • "1": Local resource user.
  • "7": Domain user or group.

Views

Developer view, vstore developer view

Usage Guidelines

None

Example

  • Clear cache of all SID mapping rules in the specified controller.

    developer:/>clear sid_mapping_cache controller=0A
    Command executed successfully.
  • Clear cache of the specified SID mapping rule in the specified controller.

    developer:/>clear sid_mapping_cache controller=0A from_sid=S-1-6-88-5
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 753951

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next