No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
debug

debug

Function

The debug command is used to debug commands on the CLI.

Format

debug

Parameters

None

Views

Developer view, Upgrade view

Usage Guidelines

You can run the debug command to enter the diagnose mode only after you have entered the developer view by running the "change user_mode current_mode user_mode=developer" command.

Example

Enter diagnose mode by running the debug command in the developer mode.

developer:/>debug
admin:/diagnose>

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 762130

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next