No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
lmr showspec

lmr showspec


The lmr showspec command is used to check the specifications of a hyper mirror.


lmr showspec




Diagnostic view

Usage Guidelines



To check the specifications of a hyper mirror, run the following command.

admin:/diagnose>lmr showspec
Max mirror LUN num(256).
Max mirror copy num(512).
Max LUN num(4096).

System Response

The following table describes the parameter meanings.



Max mirror LUN num

Maximum number of mirror LUNs.

Max mirror copy num

Maximum number of mirror copies.

Max LUN num

Maximum of LUNs.

Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 750724

Downloads: 64

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next