No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change lun_fault_enable

change lun_fault_enable


The change lun_fault_enable command is used to set the LUN disabling switch.


change lun_fault_enable lun_id_list=? enable=?





lun_id_list=? Indicates the LUN ID list.

To obtain the value, run "show lun general". The LUN IDs are separated by commas (,) or the LUN ID range is separated by hyphens (-), such as: 0, 5-8.

enable=? Indicates the LUN disabling switch.

The value can be:

  • "yes": The LUN disabling switch will be enabled.
  • "no": The LUN disabling switch will not be enabled.


Developer view

Usage Guidelines

The LUN corresponding to the LUN ID in the "change lun_fault_enable" command must exist in the storage system.


Set the LUN disabling switch in the storage system.

developer:\>change lun_fault_enable lun_id_list=0,1 enable=yes
change fault switch of lun 0 successfully.
change fault switch of lun 1 successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 748803

Downloads: 64

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next