No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system external_tlv_channel

change system external_tlv_channel


The change system external_tlv_channel command is used to enable or disable the external TLV channel of a storage array.


change system external_tlv_channel enabled=?





enabled=? Enables or disables the external TLV channel of a storage array.

The value can be "yes" or "no", where:

  • "yes": enables the external TLV channel of a storage array.
  • "no": disables the external TLV channel of a storage array.


Developer view

Usage Guidelines



Enable the external TLV channel of a storage array.

developer:/>change system external_tlv_channel enabled=yes
DANGER: You are about to change the status of the external TLV channel. This operation determines whether external clients are allowed to connect to the storage array using TLV.
Suggestion: Before performing this operation, ensure that the risk is acceptable.
Have you read danger message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 765805

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next