Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
clear nfs nfsv41_stat
Function
The clear nfs nfsv41_stat command is used to clear NFSv4.1 statistics.
Format
clear nfs nfsv41_stat [ controller=? ]
Parameters
Parameter |
Description |
Value |
|---|---|---|
controller=? |
Indicates the controller ID. |
The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C". |
Views
Developer view
Usage Guidelines
By default, NFSv4.1 statistics on the current controller are cleared. To clear NFSv4.1 statistics on a specific controller, specify the controller ID.
Example
Clean NFSv4.1 procedure statistics.
developer:/>clear nfs nfsv41_stat controller=0A
Command executed successfully.
System Response
None
Previous
