No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
spa queryinitext

spa queryinitext


The spa queryinitext command is used to query the extents to be initialized.


spa queryinitext -p pool id -l lun id -e extent id -n extent number





pool id Disk domain ID.

The ID can be obtained by running the show disk_domain general command in super administrator mode.

lun id LUN ID.

The ID can be obtained by running the show lun general command in super administrator mode.

extent id Searched extent ID.


extent number Number of extents to be queried.



Diagnostic view

Usage Guidelines

This command must be run on the working controller of the LUN.


Query the information of extents to be initialized in disk domain 0. The LUN ID of the extent to be initialized is 0. The searched extent ID is 0x2efe. The number of the extent to be queried is 2.

admin:/diagnose>spa queryinitext -p 0 -l 0 -e 0x2efe -n 2
Need Init Extent Num: 0x2
Extent ID : 0x2efe
Extent ID : 0x2eff

System Response

The following table describes the parameter meanings.



Need Init Extent Num

Number of extents to be initialized.

Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 744290

Downloads: 59

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next