No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
showsysdirtydataflag.sh

showsysdirtydataflag.sh

Function

The showsysdirtydataflag.sh command is used to show the dirty data flag of a node.

Format

showsysdirtydataflag.sh

Parameters

None

Modes

Minisystem mode

Usage Guidelines

This command is a environment repair command. Use this command only when dirty data caused device power on to fail and you need to forcibly power on the device.

Example

Show the dirty data flags of logical engine nodes.

Storage: minisystem> showsysdirtydataflag.sh 
admin:/diagnose>sys showdirtydataflag 
Dirty data flag value: 
magic : 4951 
frame sn : 2377993210796023840 
serial num : 1 
node bitmap : 3 
admin:/diagnose>exit

System Response

The following table describes the parameter meanings.

Parameter

Meaning

magic

Magic number, used to mark the validity of dirty data flags.

frame sn

Serial number of a controller enclosure.

serial num

Sequence number, used to indicate the updating sequence of dirty data.

node bitmap

Node bit where the dirty data is valid.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 628025

Downloads: 55

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next