No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show fs_migration general

show fs_migration general


The show fs_migration general command is used to batch query file system migration tasks or query a file system migration task.


show fs_migration general [ source_fs_id=? ]





source_fs_id Source file system ID of the migration.

To obtain the value, run "show fs_migration general".


Developer view, vstore developer view

Usage Guidelines



Query detailed information about the migration task whose file system ID is "1".

developer:/>show fs_migration general source_fs_id=1
  Source FS ID              : 1                                 
  Source FS Name            : fs0001                            
  Target Pool ID            : 0                                 
  Target Pool Name          : ss                                
  Target Controller         : 0B                                
  Health Status             : Normal                            
  Running Status            : Migrating                         
  Migrate Speed             : High                              
  Migrate Progress(%)       : 98                                
  Start Time                : 2019-04-04/11:11:44 UTC+08:00                                   
  Detailed Status           : The file system is being migrated. 
  Suggestion                : Please wait.                      
  Migrate Temporary FS ID   : 13  
  Migrate Type              : Snap and Data                     
  Create Snap After Migrate : --                                
  Break After Migrate       : --                                
  Migrate Phase             : Normal  
  Present Migrate Snap      : --                                

System Response

The following table describes the parameter meanings.



Source FS ID

Source file system ID of the migration.

Source FS Name

Source file system name of the migration.

Target Pool ID

Target storage pool ID of the migration.

Target Pool Name

Target storage pool name of the migration.

Target Controller

Target controller name of the migration.

Health Status

Health status.

Running Status

Running status.

Migrate Speed

Migration speed.

Migrate Progress(%)

Migration progress.

Start Time

Migration start time.

Detailed Status

Detailed status.



Migrate Temporary FS ID

ID of the target temporary file system for the migration.

Migrate Type

Migration type.

Create Snap After Migrate

Whether to generate a snapshot after the migration is complete.

Break After Migrate

Whether to disconnect the migration relationship after the migration is complete.

Migrate Phase

Current migration phase.

Present Migrate Snap

Name of a snapshot being migrated.

Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 743194

Downloads: 59

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next