Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
clear cifs smb2_stat
Function
The clear cifs smb2_stat command is used to clear the statistics about the SMB2 protocol.
Format
clear cifs smb2_stat [ controller=? ]
Parameters
Parameter |
Description |
Value |
|---|---|---|
controller =? |
Indicates the controller ID. |
The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C". |
Views
Developer view
Usage Guidelines
None
Example
To clear the statistics about the SMB2 protocol, run the following command.
developer:/>clear cifs smb2_stat
Command executed successfully.
System Response
None
Previous
