No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change cifs log_level

change cifs log_level


The change cifs log_level command is used to set the log level for the cmr_cm, cmr_store, cmr_auth, or cmr_msrpc module.


change cifs log_level module=? log_level=? [ controller=? ]





module=? Module name.

The value can be "cmr_cm", "cmr_auth", "cmr_store", or "cmr_msrpc", where:

  • "cmr_cm": cmr_cm module.
  • "cmr_auth": cmr_auth module.
  • "cmr_store": "cmr_store" module.
  • "cmr_msrpc": "cmr_msrpc" module.
log_level=? Log level.

The value can be "ERROR", "WARN", or "DEBUG", where:

  • "ERROR": The log level is ERROR.
  • "WARN": The log error is WARN.
  • "DEBUG": The log level is DEBUG.
controller=? Controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".


Developer view

Usage Guidelines



  • Set the log level of the cmr_cm module to "DEBUG".

    developer:/>change cifs log_level module=cmr_cm log_level=DEBUG 
    Command executed successfully.
  • Set the log level of the cmr_cm module to "DEBUG" on controller B.

    developer:/>change cifs log_level module=cmr_cm log_level=DEBUG controller=0B
    Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 749571

Downloads: 64

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next